Why Smoke & CO Detection Still Matters in Gas-Powered Homes
Not all gas-related accidents begin with a detectable gas leak.
In many homes, incomplete combustion from gas appliances can producekolmonoxid, an invisible and odorless gas that builds up silently. In other cases, smoke or fire may occurförea gas alarm is triggered — or even without a gas leak at all.
Smoke and carbon monoxide detection focuses onincident consequences, providing a critical backup layer when preventive measures are not enough.
What This Detector Monitors
How Alerts Work
A loud siren alerts everyone nearby when smoke or CO reaches unsafe levels.
Different LED patterns indicate alarm, standby, low battery, or fault status.
When connected to Wi-Fi, the detector sends instant alerts through the Tuya Smart / Smart Life app, keeping you informed even when you’re away.
Key Safety Features
01
Dual smoke and carbon monoxide sensing
02
Test and temporary silence button
03
Battery powered operation with low-battery alert
04
Remote alert access through mobile app
05
Simple wall or ceiling installation
How This Complements Gas Leak Detection
Gas leak detectors are designed to identify fuel leaks before an incident occurs.
Smoke and carbon monoxide detectors serve a different role. They respond when combustion-related hazards develop — such as smoke buildup or carbon monoxide accumulation — even if no gas leak is detected.
Together, these layers provide broader gas safety coverage by addressing bothpreventionandincident consequences.
Smoke and carbon monoxide detection focuses on incident consequences.
For early warning and prevention, a dedicatedgasläckagedetekteringdeviceis still essential.
Where to Install a Smoke & Carbon Monoxide Detector
Recommended locations include:
For best performance, install the detector on the ceiling and near the center of the room when possible.
Avoid installing near kitchens, bathrooms, vents, windows, or areas with high humidity, as these may cause false alarms or reduce accuracy.
Så här fungerar det
Install the detector using the included mounting hardware.
Insert batteries and power on the device.
The detector continuously monitors smoke and carbon monoxide levels.
When unsafe levels are detected, a loud alarm sounds and — if connected — a mobile alert is sent instantly.
Produktens tekniska specifikationer
Ytterligare information
| Vikt | 0,2 pund |
|---|---|
| Mått | 12 × 12 × 2,8 cm |
| Material | ABS-plast |
| Typ | Wi-Fi |
| Färg | Vit färg |
| Sensor | Fotoelektrisk sensor |
| Larmvolym | >85dB (A) vid mätare |
| Garanti | 24 månader |
| Driva | DC 2*1.5V AA Alkaliskt |
| Installation | Skruva |
| Batteriets livslängd | 3 år |
What This Detector Does Not Do
- Doesnotdetect natural gas or propane leaks
- Doesnotshut off gas supply
- Doesnotreplace a gas leak detector
Installationsguide
Steg-för-steg-guide: Enkel installation av GasNet-CM
Support och dokumentation
Vanliga frågor
No. This device detects smoke and carbon monoxide, not gas leaks. It is designed to complement, not replace, gas leak detection.
Yes. The local audible alarm works independently. Wi-Fi is only required for mobile notifications.
Yes. Multiple detectors can be added and monitored within the same app.
The alarm exceeds 85 dB at 3 meters.
Yes. A gas leak detector focuses on detecting fuel leaks early. This device detectssmoke and carbon monoxide, providing a secondary safety layer for combustion-related hazards—even if no gas leak is present.
For many homes, yes. A 2-in-1 unit monitors both risks in one device, which simplifies installation and maintenance while still providing loud local alarms and app notifications.
Utvalda produkter
Prenumerera för att få kupongen för din första beställning.
Leverantör av lösningar för energieffektivitet och säkerhet i hemmet
©2025 Alla rättigheter förbehållna. Grus IoT Co., Ltd.