WiFi天然气探测器——应用提醒 |GasNet-第四季
SKU: GasNet-S4
价格范围：32.00美元至89.00美元
Early alerts for natural gas leaks.
GasNet-S4 monitors combustible gas risks for residential indoor use. When connected to WiFi, it can send app alerts to your phone while the built-in alarm alerts people nearby.
Supports app sharing so family members can receive notifications too. Includes a loud local alarm and a plug-in design for quick installation.
WiFi Natural Gas Detector for Home Monitoring
不要等到闻到煤气味才去——早期的泄漏往往是看不见的
你的家闻起来像煤气味吗——还是根本没有味道？
Some gas leaks may not be easy to notice by smell alone, especially in enclosed indoor areas. Small leaks can build up quietly, especially in enclosed areas like kitchens, basements, or utility rooms.
GasNet-S4 is designed to monitor natural gas risks in residential indoor spaces and alert you when attention is needed.
Installation Guide for Natural Gas Monitoring
1. 壁挂式安装
将探测器安装在靠近燃气设备（如炉子或热水器）的直立墙上。
2. 推荐身高
Install the device in a suitable position based on the target gas type, room layout, and appliance location. For natural gas monitoring, higher wall placement is commonly used. Always follow the product manual before mounting.
3. Avoid Interference Areas
Avoid installing in bathrooms, humid areas, or directly above open flames. Keep away from alcohol, paint, or chemical vapors to reduce false alarms.
4. WiFi连接
For stable app notifications, install the detector within normal home WiFi range and follow the app setup instructions.
Placement should follow the product manual and local safety practices. If you are unsure about the installation location, consult a qualified professional.
Before You Buy: Check the Installation Conditions
- Gas type:Designed for natural gas monitoring. Do not use as a propane / LPG detector.
- Not for smoke or CO:This device does not detect smoke, carbon monoxide, gasoline vapor, refrigerant, or chemical fumes.
- Indoor use only:Install only in a dry, protected indoor residential location.
- Operating range:Use within the listed range: 32°F–131°F (0°C–55°C).
- Power required:Requires continuous USB power. Please check outlet distance before installation.
- WiFi alerts:App alerts require a stable 2.4GHz WiFi connection and Smart Life app setup.
Designed for Everyday Indoor Gas Monitoring
保护您的家免受煤气泄漏
——为现实生活空间打造
From kitchen stovetops to basement water heaters, gas leaks can occur in everyday residential settings. GasNet-S4 is designed to monitor natural gas and propane risks in suitable residential indoor environments and alert you when attention is needed.
When WiFi is connected, alerts are sent directly to your phone, helping you stay informed whether you’re home or away.
智能气体监测的意义所在
Key Benefits of GasNet-S4
Combustible Gas Monitoring
Designed to respond when combustible gas concentration reaches the alarm threshold, supporting timely awareness in suitable residential indoor areas.
Local Alarm + App Alerts
The detector sounds locally and sends app notifications when connected to WiFi and the Smart Life app.
Remote Awareness When Connected
Check device status and receive gas alarm notifications through the app when WiFi connection is available.
Simple Everyday Use
Wall-mounted design, USB power, LCD display, and test/mute controls support routine home monitoring.
How GasNet-S4 Works?
GasNet-S4 is a WiFi-enabled natural gas alarm designed for residential indoor use. Once powered on and preheated, it continuously monitors the surrounding air for changes in gas concentration.
When the preset alarm threshold is reached, the device triggers a loud on-site alarm and, when connected to WiFi, sends a real-time alert to your smartphone.
After power-on, the detector enters a preheating process before normal monitoring. If the device repeatedly restarts or stays in preheating mode, check the power cable, adapter, and power supply first, then contact support.
持续监控
GasNet-S4 continuously monitors the surrounding air while powered on. If the detected gas concentration reaches the alarm threshold, the device triggers a local warning and sends an app notification when WiFi is connected.
即时警报
When a gas warning level is detected, the alarm sounds locally and a notification is sent through the mobile app (WiFi required).
Stay Connected with Smart Detection
When connected to WiFi, GasNet-S4 works with the Smart Life app to keep you informed of device status and gas alarm notifications.
Connect the detector to a stable 2.4GHz WiFi network.
Enable push notifications in the app.
Use the test function to confirm the alarm and indicators are working.
Share device access with family members if multiple users need notifications.
直观的监控和控制
移动应用可以清晰地查看探测器的现状并在气体警告触发时发出警报。
外部智能燃气阀控制需要兼容的设备和独立配置。
产品技术规格
附加信息
| 重量 | 0.25磅 |
|---|---|
| 尺寸 | 9.6 × 9.6 × 3.3 厘米 |
| 安装 | 交流电插拔式 + 壁挂式 |
| 气压 | 86~106千帕 |
| 输入电压 | DC5V（micro USB 标准连接器） |
| 功耗 | <150毫安 |
| 工作温度 | 32℉ – 131℉ (0°C – 55°C) |
| 工作湿度 | ≤80% |
| 气体检测浓度 | 8% LEL |
| 探测区域 | 375平方英尺（35平方米） |
| 报警时间 | <30秒 |
| 报警方法 | 警报声 + LCD 闪烁“GAS” |
| 警报声 | ≥85分贝 |
| 包裹里的产品数量 | 1包，2包，3包 |
| 特征 | Multi-User Notifications, Natural Gas Detection, WiFi + App Alerts |
支持和文档
常见问题
天然气闻起来是什么味道？
Natural gas itself is odorless, but a sulfur-like “rotten egg” smell is added for safety. However, small leaks may not be noticeable by smell alone, especially in enclosed spaces. GasNet-S4 helps monitor combustible gas risks so you are not relying only on smell.
这个气体泄漏探测器的灵敏度有多高？
GasNet-S4 is designed to trigger an alarm at 8% LEL, according to the product specification.
这个天然气探测器可以与 WiFi 配合使用吗？
Yes. When connected to WiFi, GasNet-S4 sends real-time alerts to your phone through the mobile app. The local audible alarm will still function even if WiFi is temporarily unavailable.
环境温度会影响性能吗？
Yes. GasNet-S4 should be used in a dry, protected indoor location within the listed operating range: 32°F–131°F (0°C–55°C). Avoid outdoor, wet, freezing, or exposed areas. Stable USB power supply is also important for normal operation.
Does GasNet-S4 detect propane?
No. GasNet-S4 should currently be treated as a natural gas detector. Propane / LPG detection is not confirmed in the current official product documentation, so we do not recommend using it as a propane / LPG detector.
Is GasNet-S4 a smoke detector or carbon monoxide detector?
No. GasNet-S4 is designed for natural gas detection. It does not replace a smoke detector, carbon monoxide detector, propane detector, or LPG detector.
If you need smoke and carbon monoxide detection, use a dedicated smoke / CO alarm such asGasNet-CM.
停电时检测器还能工作吗？
GasNet-S4 requires continuous power via USB to operate. During a power outage, the device will not function unless powered by an external backup source.
我家需要多少个探测器？
Coverage depends on your home layout, gas type, appliance locations, and airflow. Many users place detectors near suitable indoor areas where gas appliances are used. Always follow the product manual for placement guidance.
报警后，探测器是如何重置的？
Once gas concentration drops below the warning level, the detector automatically returns to monitoring mode.
我该如何手动重置或测试设备？
使用该TEST通过设备上的按钮进行功能检查或按照用户手册的重置说明操作。
将 GasNet-S4 与我们的烟雾和一氧化碳探测器 – GasNet-CM. Together, they create a smarter, safer home that covers more risks—gas, smoke, and invisible CO leaks.
想要保护家中的每个角落吗？
We’ve put together a full guide on smart gas and fire safety for modern families. From real-life tips to easy device placement, you’ll find everything you need to build peace of mind at home.
订阅即可获得首单优惠券。
